Recovery method and separation device of the hotte

2022-10-24
  • Detail

Waste cans recycling method and its sorting device

waste cans aluminum recycling treatment method and its sorting device. In the process of treatment, the waste cans cover and bottom are cut and separated with a knife. Then, the side part is rolled into plates, which are collected separately for material sorting. The sorting device adopts electric circuit signal control, and is composed of intermittent feeding mechanism, axial cutting and radial circumferential cutting mechanism, and roller rolling mechanism. It is installed in public places for recycling, avoiding the waste caused by human labor caused by different aluminum materials, confusion collection and collection by corrosion resistance (Experiment in solution)

it is more important to turn the clamp; From: Chinalco

this article comes from the network. The copyright belongs to the original work. Because it not only needs to make use of a lot of electronic expertise, but also sometimes needs to be owned by people with rich on-site experience. The principle of beam displacement measurement is roughly the same as that of deformation measurement. It is only for everyone to share and learn. If the author believes that infringement is involved, please contact us, and we will delete it immediately after verification

Copyright © 2011 JIN SHI